Mind Peak WaveRider Manual de instrucciones descargar pdf (Pagina 13)

WaveRider Operating Manual

SETUP USB TO SERIAL PORT CONVERTER CABLE

INSTALL DRIVER, CONNECT CABLE, CONNECT WAVERIDER

1. Run Setup.exe and follow installation instructions. (From CD).

2. Run the file CDM.exe (USB to Serial Comm Port Cable Driver). (From CD).

3. Connect the USB to Serial Comm Port Cable.

4. Install a fresh battery in the WaveRider and connect the WaveRider to the USB to Serial

Comm Port Cable.

SELECT CORRECT COMM PORT IN WAVEWARE AND USB TO SERIAL PORT DRIVER

The serial (comm) port specified by WaveWare (WaveRider Software) and the serial port specified

by the USB to Serial Port Cable Driver must match.

Comm port setting must be 1 through 4 and must be the same for both WaveWare and the USB to

Serial Port cable.

Every computer is different.

Some comm ports may already be in use.

You may need to try several comm port assignments until you find one that works.

Windows may indicate that a comm port is in use when it is not, or is not in use when it is.

Click the ‘on’ box in WaveWare to turn the WaveRider on. If the settings are correct the ‘on’ box will

remain checked, the red light on the WaveRider will come on and remain on, and the software will run

without error messages.

SELECT COMM PORT IN WAVEWARE (WAVERIDER SOFTWARE)

1. From the ‘Options’ Menu in WaveWare, select ‘Change Comm Port’.

2. Choose the appropriate Comm Port Setting.

SELECT COMM PORT FOR USB TO SERIAL PORT DRIVER (WINDOWS VISTA)

1. Select ‘System’ from the Control Panel.

2. Select ‘Device Manager’ from Tasks.

3. If necessary provide permission to continue.

4. Expand ‘Ports’.

5. Right click on ‘USB to Serial Comm Port (Comm x)’ and choose ‘properties’.

6. Select the ‘Port Settings’ tab.

7. Select the ‘Advanced’ Button.

8. Choose the appropriate comm port setting.

SELECT COMM PORT FOR USB TO SERIAL PORT DRIVER (WINDOWS XP)

1. From the control panel select ‘system’.

2. Choose the ‘hardware’ tab.

3. Select ‘Device Manager’ button.

4. Expand ‘Ports’.

5. Right click on ‘Prolific USB to Serial Comm Port (Comm x)’ and choose ‘properties’.

6. Select the ‘Port Settings’ tab.

Select the ‘Advanced’ Button.

Choose the appropriate comm port setting

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 156 157

Sin comentarios

Mind Peak WaveRider Manual de instrucciones Pagina 13